Multifunctional Three Phase monitoring relay CM-PVE 320-460VAC
CM-PVE Phase monitoring relay 1n/o, L1,2,3=320-460VAC
The CM-PVE relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 320-460 V AC and has a 1 n/o output (closed circuit principle) with contacts rated at 250 V / 4 A. The CM-PVE monitors the phase loss, overvoltage and undervoltage. The corresponding threshold values are fixed. The relay is suitable for monitoring of three phase mains.
Dimensions
Product Net Width: 22.5 mm
Product Net Height: 78 mm
Product Net Depth / Length: 78.5 mm
Product Net Weight: 0.066 kg
Technical
Function: Phase failure detection
Over- and undervoltage monitoring
Sub-Function: Phase loss
Sub-Function 2: 02 Over- and undervoltage (fixed)
Measuring Range: (L-L) 320 ... 460 V AC
Time Range: 500 ms start-up delay, 500 ms tripping delay
Rated Control Supply Voltage (Us): (L-L) 320 ... 460 V AC
Rated Frequency (f): Supply Circuit 50/60 Hz
Output: 1 n/o contact
Terminal Type: Screw Terminals
Rated Operational Current AC-12 (Ie): (230 V) 4 A
Rated Operational Current AC-15 (Ie): (230 V) 3 A
Rated Operational Current DC-12 (Ie): (24 V) 4 A
Rated Operational Current DC-13 (Ie): (24 V) 2 A
Rated Impulse Withstand Voltage (Uimp): Input Circuit 4 kV
Rated Insulation Voltage (Ui): Input Circuit / Output Circuit 400 V
Degree of Protection: Housing IP50, Terminals IP20
Overvoltage Category: III
Pollution Degree: 3
Short-Circuit Protective Devices: Output Circuit NC - F Type Fuses 10 A, Output Circuit NO - F Type Fuses 10 A
Connecting Capacity: Flexible with Ferrule 2x 0.75 ... 1.5 mm²
Flexible 2x 1 ... 1.5 mm²
Rigid 2x 0.75 ... 1.5 mm²
Tightening Torque: 0.6 ... 0.8 N·m
Wire Stripping Length: 10 mm
Audited Supplier 
){kind=link}