Customization: | Available |
---|---|
Task: | Adjust |
Structure: | Combination |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Categorise | Incremental Shaft model | |
Diameter | 60 mm dia. | |
Power supply voltage | 12 to 24 VDC (-10% to +15%) Ripple (p-p) 5% max. | |
Current consumption | 100 mA max. | |
Resolution | 360 P/R | |
Inrush current | Approx. 9 A (5 µs) | |
Output phases | A, B and Z | |
Control output | Output type | Complementary output |
Output voltage | VH: Vcc -3 V min. (IO = 30 mA) VL: 2 V max. (IO = -30 mA) |
|
Load current | ±30 mA | |
Max. response frequency | 83 kHz | |
Phase difference on output | 90±45 ° between A and B (1/4 T ± 1/8 T) | |
Rise and fall times of output | 1 µs max. (Cable length: 2 m, load current: 30 mA) | |
Starting torque | Room temperature: 10 mN.m max. Low temperature: 15 mN.m max. |
|
Moment of inertia | 1.5 x 10-6 kg.m2 max. | |
Shaft loading | Radial: 120 N Thrust: 50 N |
|
Max. permissible rotation | 5000 r/min | |
Protective circuit | Output short-cut protection Power supply reverse polarity protection |
|
Ambient temperature | Operating: -10 to 70 ºC (with no icing) Storage: -25 to 85 ºC (with no icing) |
|
Ambient humidity | Operating: 35 to 85 % (with no condensation) Storage: 35 to 85 % (with no condensation) |
|
Insulation resistance | Between charged parts and the case: 20 MΩ or higher (500 VDC megger) | |
Dielectric strength | Between charged parts and the case: 500 VAC 50/60 Hz 1 min | |
Vibration resistance | Destruction: 10 to 500 Hz, 2-mm or 150 m/s2 double amplitude for 11 min 3 times each in X, Y, and Z directions | |
Shock resistance | Destruction: 1000 m/s2 for 3 times each in X, Y, and Z directions | |
Degree of protection | IEC: IP65 Company standard: Oil resistance |
|
Connection method | Pre-wired models (Cable length: 2 m) | |
Material | Case: Zinc alloy Main Unit: Aluminum Shaft: SUS420J2 |
|
Weight | Package: Approx. 400 g | |
Accessories | Instruction manual |